Grout Color Seal Care

What to Expect

HydroShield protected surfaces are not self-cleaning. HydroShield surfaces are up to 75% easier to clean because the dirt and grime no longer penetrate the surface, but sit on top of the HydroShield coating.

Easy-to-Clean Grout Color Seal

To clean your newly restored grout, be sure to first vacuum any loose dirt.  Apply a neutral pH cleaner using a sponge or mop. Once cleaner is applied to the surface, allow it to sit for several minutes.  This will allow the cleaner to loosen any stubborn dirt and oils that may be present. Be sure to AVOID ANY SCRUBBING. Once cleaner has been allowed to sit on the surface, take a mop or towel and wipe dry.  Be sure to dry the grout lines where any dirt and dust may have settled from the cleaning process.

For best results, use HydroShield Neutral pH Cleaner. It is safe for our grout color seal and is anti-bacterial; leaving grout amazingly clean and sanitary.  We love our cleaner and know you will too!

 

Grout Maintenance Instructions

Congratulations on your HydroShield purchase!

By choosing HydroShield to protect your grout you have ensured long lasting beauty, durability, and peace of mind.

Maintenance and Cleaning of Grout:

Regular maintenance is important to keep the sealed grout looking good. Use a soft bristle brush or microfiber towel. HydroShield Neutral pH Stone Cleaner Concentrate is recommended. Do not use the white scrub pad on the grout.

Back Splash: Please keep dry for 24 hours after the HydroShield treatment. Wipe up spills immediately. Clean with a neutral pH stone cleaner regularly as conditions warrant.

Showers: Please do not use shower for 48 hours after the HydroShield treatment. Depending on water conditions, use a squeegee or wipe down with a towel after each use. Do not let water pool on the grout. Clean with a neutral pH stone cleaner regularly as conditions warrant. Wipe grout dry with a clean microfiber towel.

Floors: Please keep dry for 24 hours after the HydroShield treatment. Sweep or vacuum regularly to keep dirt from building up. Mop up spills immediately. High traffic areas should be cleaned with a neutral pH stone cleaner as conditions warrant. Spot clean as necessary in low traffic areas. After cleaning wipe grout dry with a clean microfiber towel.

Please do not use acidic cleaners on your HydroShield treated grout. Many cleaners, bath & grooming products contain acids. Acids can harm grout. Grout treated with HydroShield does not require harsh cleaning solutions or methods.

Using any product that contains acids, ammonia, or bleach on your HydroShield treated grout will void your HydroShield True Warranty. Do not use vinegar, to clean your grout. Please read all product labels carefully!

Shower Maintenance Instructions

Congratulations on your HydroShield purchase!

Please do not use shower for 48 hours after the HydroShield treatment. By choosing HydroShield to protect your tile shower you have ensured long lasting beauty, durability, and peace of mind.

Maintenance and Cleaning of Tile Showers

Regular maintenance is important to keep the protected shower mold free & looking good. Recommended after each use. Rinse the shower walls and floor. Either squeegee or wipe down with a dry towel. You can also let the shower drip dry while getting ready. After 15 or 20 minutes step into shower and wipe down with a dry towel. Do not let water pool on the grout.

Helpful Tips:

1. Run the fan as long as possible leaving shower door open until shower is dry. A fan timer is recommended.

2. Bar soap results in more soap scum than liquid body wash. While the HydroShield treatment helps prevent soap scum build up, using a liquid body wash product will also help to minimize soap scum build up.

Regular Cleaning. Clean tile and grout with a neutral pH stone cleaner as conditions warrant. Wipe tile & grout dry with a clean & dry microfiber towel. HydroShield Neutral pH Stone Cleaner Concentrate or Clean & Preserve is recommended. Do not use the white scrub pad on the grout. Use a soft bristle brush, if needed, on the grout and microfiber towel on the tile. Wipe grout dry with a clean microfiber towel.

Please do not use acidic cleaners on your HydroShield treated surfaces. Many cleaners, bath & grooming products contain acids. Acids can harm grout. Grout treated with HydroShield does not require harsh cleaning solutions or methods.

Using any product that contains acids, ammonia, or bleach on your HydroShield treated shower will void your HydroShield True Service Warranty. Do not use vinegar, to clean your grout. Please read all product labels carefully!

We Love our Customers

We have solutions for all of your surface protection, sealing and restoration needs. Schedule your free bid today!